Ruisdael Observatory Data Catalog - User contributions [en]

TROLIX-19

2025-08-15T14:17:04Z

Marije Timmermans: update instruments

{{Campaign
|title=TROLIX-19
|description=A Sentinel-5p/TROPOMI validation campaign was held in the Netherlands based at the Cabauw Experimental Site for Atmospheric Research during September/October 2019. The 2019 TROpomi vaLIdation eXperiment (TROLIX’19) consisted of active and passive remote sensing platforms in conjunction with several balloon-borne, airborne and surface chemical measurements.

The goal of this geophysical validation campaign was to make intensive observations for thevalidation of TROPOMI L2 main data products (such as NO2, O3, HCHO, aerosol layer height, clouds and UVAI) under realistic, non-idealized conditions with varying cloud cover and a wide range of atmospheric conditions.

Since TROPOMI is a hyperspectral imager with a very high spatial resolution of 3.5 km x 7 km, understanding local effects such as inhomogeneous sources of pollution, sub-pixel clouds and variations in ground albedo is important to interpret TROPOMI results. Therefore, the campaign includes sub-pixel resolution local networks of sensors, involving Pandora and MAX-DOAS instruments, around Cabauw (51.97°N, 4.93°E) and within the city of Rotterdam (51.92°N, 4.48°E). Cabauw is considered rural while Rotterdam is densely populated and industrialized. CESAR (Cabauw Experimental Site for Atmospheric Research), using its comprehensive in-situ and remote sensing observation program in and around the 213 m meteorological tower (see Section 3), was the main site of the campaign with focus on vertical profiling using lidar instruments for aerosols, clouds, water vapor, tropospheric and stratospheric ozone, as well as balloon-borne sensors for NO2. The ozonesonde profiles were measured at KNMI in De Bilt which is approximately 23 km from the CESAR site.

Instruments that were used:

- Stationary MAX-DOAS and Pandora instruments in different locations

- BIRA Mobile-DOAS instrument

- NO2 sondes

- Ozonesondes

- NASA LIDAR ozone observations

- Raman LIDAR CAELI

- In-situ NO, NO2, O3 and aerosols measurements
|atLocation=Cabauw
|hasGeographicCoordinates=51.970271 N, 4.926209 E
|startDate=2019-09-01
|endDate=2019-09-30
|contactPoint=Arnoud Apituley
|landingPage=https://ruisdael-observatory.nl/trolix19-campaign/
|hasParticipant=KNMI
}}

CINDI-3

2025-08-15T14:07:49Z

Marije Timmermans: mentioned instruments used

{{Campaign
|title=CINDI-3
|description=Third Cabauw Intercomparison of Nitrogen Dioxide measuring Instruments, which took place at the Cabauw Experimental Site for Atmospheric Research (CESAR) from 21 May until 24 June 2024. CESAR is one of the main facilities of the Dutch Ruisdael Observatory located midway in between the cities of Rotterdam and Utrecht, and managed by KNMI.

Over 100 researchers from 18 countries participated in CINDI-3, operating 32 UV-Vis DOAS instruments to compare and intercalibrate measurements of air pollutants and to support the validation of satellite measurements from space-borne instruments such as Sentinel-5p/TROPOMI. CINDI-3 is the third intercomparison campaign of this kind. The overall campaign planning and coordination was carried out by a steering committee, led by BIRA-IASB (Royal Belgian Institute for Space Aeronomy), coordinating the CINDI-3 intercomparison schedule and all additional activities such as the mobile and aircraft observations.

The main science objectives of CINDI-3 are the following:

- To assess the consistency of slant column measurements of several key target species (NO2, ozone, O4 and HCHO) of relevance for the validation of S5P and the future ESA atmospheric
Sentinels, through coordinated operation of a large number of DOAS and MAXDOAS instruments from all over the world.

- To study the relationship between remote-sensing column- and profile-measurements of NO2, HCHO and ozone and reference in-situ concentration measurements of the same species.
- To investigate the horizontal representativeness of MAXDOAS measuring systems in view of their use for the validation of satellite tropospheric measurements featuring ground pixel areas in the range of 25-50 km2.

CINDI-3 was organized as part of the ACTRIS-CREGARS Topical Center for trace gas remote sensing, within the framework of the collaboration between ACTRIS and NDACC, and conducted with additional support from ESA, NASA and from the EU Horizon2020 ATMO-ACCESS project (https://www.atmo-access.eu/).
Additionally, the campaign was supported by KNMI.

The following instruments were used:

- Static MAXDOAS and zenith-sky DOAS instruments

- In situ ICAD instrument

- Brewer

- Ozone sondes

- NO2 sondes

- Lidar systems: The multiwavelength Raman lidar CAELI, UV-depolarisation lidar, Ceilometer, ESA EMORAL system, SMOL tropospheric ozone differential absorption lidar, NO2 differential absorption lidar, Mobile Aerosol Monitoring System (MAMS) and scanning AERONET photometer

- Mobile DOAS instruments

- Airborne measurements

- Satellite data
|atLocation=Cabauw
|hasGeographicCoordinates=51.970271 N, 4.926209 E
|startDate=2024-05-21
|endDate=2024-06-25
|landingPage=https://ruisdael-observatory.nl/cindi-3-intercomparison-campaign/
|hasParticipant=ACTRIS, KNMI
|contributesTo=Static MAXDOAS and zenith-sky DOAS instrumentsStatic MAXDOAS and zenith-sky DOAS instruments
|hasImage=cindi3.png
}}

CINDI-3

2025-08-15T14:06:40Z

Marije Timmermans:

{{Campaign
|title=CINDI-3
|description=Third Cabauw Intercomparison of Nitrogen Dioxide measuring Instruments, which took place at the Cabauw Experimental Site for Atmospheric Research (CESAR) from 21 May until 24 June 2024. CESAR is one of the main facilities of the Dutch Ruisdael Observatory located midway in between the cities of Rotterdam and Utrecht, and managed by KNMI.

Over 100 researchers from 18 countries participated in CINDI-3, operating 32 UV-Vis DOAS instruments to compare and intercalibrate measurements of air pollutants and to support the validation of satellite measurements from space-borne instruments such as Sentinel-5p/TROPOMI. CINDI-3 is the third intercomparison campaign of this kind. The overall campaign planning and coordination was carried out by a steering committee, led by BIRA-IASB (Royal Belgian Institute for Space Aeronomy), coordinating the CINDI-3 intercomparison schedule and all additional activities such as the mobile and aircraft observations.

The main science objectives of CINDI-3 are the following:
- To assess the consistency of slant column measurements of several key target species (NO2, ozone, O4 and HCHO) of relevance for the validation of S5P and the future ESA atmospheric
Sentinels, through coordinated operation of a large number of DOAS and MAXDOAS instruments from all over the world.
- To study the relationship between remote-sensing column- and profile-measurements of NO2, HCHO and ozone and reference in-situ concentration measurements of the same species.
- To investigate the horizontal representativeness of MAXDOAS measuring systems in view of their use for the validation of satellite tropospheric measurements featuring ground pixel areas in the range of 25-50 km2.

CINDI-3 was organized as part of the ACTRIS-CREGARS Topical Center for trace gas remote sensing, within the framework of the collaboration between ACTRIS and NDACC, and conducted with additional support from ESA, NASA and from the EU Horizon2020 ATMO-ACCESS project (https://www.atmo-access.eu/).
Additionally, the campaign was supported by KNMI.

The following instruments were used:
- Static MAXDOAS and zenith-sky DOAS instruments
- In situ ICAD instrument
- Brewer
- Ozone sondes
- NO2 sondes
- Lidar systems: The multiwavelength Raman lidar CAELI, UV-depolarisation lidar, Ceilometer, ESA EMORAL system, SMOL tropospheric ozone differential absorption lidar, NO2 differential absorption lidar, Mobile Aerosol Monitoring System (MAMS) and scanning AERONET photometer
- Mobile DOAS instruments
- Airborne measurements
- Satellite data
|atLocation=Cabauw
|hasGeographicCoordinates=51.970271 N, 4.926209 E
|startDate=2024-05-21
|endDate=2024-06-25
|landingPage=https://ruisdael-observatory.nl/cindi-3-intercomparison-campaign/
|hasParticipant=ACTRIS, KNMI
|contributesTo=Static MAXDOAS and zenith-sky DOAS instrumentsStatic MAXDOAS and zenith-sky DOAS instruments
|hasImage=cindi3.png
}}

KNMI Lutjewad UV-Lidar (LUVLi) uncalibrated attenuated backscatter

2025-08-08T13:14:42Z

Marije Timmermans: Created page with "{{Dataset |title=KNMI Lutjewad UV-Lidar (LUVLi) uncalibrated attenuated backscatter |description=Together with the cloud radar and microwave radiometer operated by TU-Delft in Lutjewad, the KNMI operated UV-lidar completes the suite of instruments minimally needed to contribute to a ACTRIS cloud remote sensing station. The lidar also is a start for aerosol remote sensing at the station. Dataset is on request and soon will be published on dataplatform.knmi.nl. |type=Re..."

{{Dataset
|title=KNMI Lutjewad UV-Lidar (LUVLi) uncalibrated attenuated backscatter
|description=Together with the cloud radar and microwave radiometer operated by TU-Delft in Lutjewad, the KNMI operated UV-lidar completes the suite of instruments minimally needed to contribute to a ACTRIS cloud remote sensing station. The lidar also is a start for aerosol remote sensing at the station.

Dataset is on request and soon will be published on dataplatform.knmi.nl.
|type=Remote Sensing Observation
|license=CC BY 4.0
|contactPoint=Diego Alves Gouveia
|creator=Diego Alves Gouveia
|creator_organization=KNMI
|hasGeographicCoordinates=53.403995 N, 6.353922 E
|startDate=2025-02-27
|endDate=2030-01-01
}}

ACTRIS-EARLINET aerosol optical property profiles over CBW Cabauw - Netherlands

2025-08-08T12:34:29Z

Marije Timmermans: Created page with "{{Dataset |title=ACTRIS-EARLINET aerosol optical property profiles over CBW Cabauw - Netherlands |description=This dataset collects all the aerosol optical property profiles at the aerosol remote sensing CBW station (Cabauw - Netherlands). This dataset is incremental: data collected are added as soon as a new observation is collected and added to the ACTRIS/EARLINET database. Variables: Attenuated backscatter profile; Volume depolarization profile, Particle backscatte..."

{{Dataset
|title=ACTRIS-EARLINET aerosol optical property profiles over CBW Cabauw - Netherlands
|description=This dataset collects all the aerosol optical property profiles at the aerosol remote sensing CBW station (Cabauw - Netherlands). This dataset is incremental: data collected are added as soon as a new observation is collected and added to the ACTRIS/EARLINET database.

Variables: Attenuated backscatter profile; Volume depolarization profile, Particle backscatter coefficient profile, Particle extinction coefficient profile, Lidar ratio profile, Ångström exponent profile, Backscatter-related Ångström exponent profile, Particle depolarization ratio profile.
|type=Remote Sensing Observation
|format=netCDF
|servedBy=ACTRIS-ARES Data Portal
|landingPage=https://data.earlinet.org/earlinet/
|identifier=https://doi.org/10.57837/CNR-IMAA/ARES/ACTRIS-EARLINET/2024/CBW/AEROSOL_OPTICAL_PROPERTY_PROFILES
|license=CC BY 4.0
|contactPoint=Arnoud Apituley
|creator=Arnoud Apituley
|creator_organization=KNMI
|atLocation=Cabauw
|hasGeographicCoordinates=51.97000122 N, 4.929999828 E
|hasElevation=188
|startDate=2024-06-07
|endDate=2030-01-01
}}

KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in De Bilt-NL

2025-08-08T08:09:48Z

Marije Timmermans:

{{Dataset
|title=KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in De Bilt-NL
|description=Tropospheric columns and profiles of NO2, HCHO and aerosol, retrieved from Multi-Axes DOAS measurements in De Bilt-NL. Temporal resolution is approximately 4/hour for no2 and aerosol, 1/hour for HCHO. The profiles have limited vertical resolution, with 2-4 degrees of freedom. The data can be found here: https://www-air.larc.nasa.gov/missions/ndacc/data.html?RapidDelivery=rd-list
|type=Remote Sensing Observation
|format=HDF4
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/maxdoas-de-bilt-1
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=52.101 N, 5.178 E
|startDate=2018-02-21
|endDate=2030-01-01
}}

KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in Cabauw-NL

2025-08-08T08:04:53Z

Marije Timmermans:

{{Dataset
|title=KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in Cabauw-NL
|description=Tropospheric columns and profiles of NO2, HCHO and aerosol, retrieved from Multi-Axes DOAS measurements in Cabauw-NL. Temporal resolution is approximately 4/hour for no2 and aerosol, 1/hour for HCHO. The profiles have limited vertical resolution, with 2-4 degrees of freedom. The data can be found here: https://www-air.larc.nasa.gov/missions/ndacc/data.html?RapidDelivery=rd-list
|type=Remote Sensing Observation
|format=HDF4
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/maxdoas-cabauw-1
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.968 N, 4.927 E
|startDate=2018-02-15
|endDate=2030-01-01
}}

TROLIX-19

2025-08-08T08:00:23Z

Marije Timmermans:

{{Campaign
|title=TROLIX-19
|description=A Sentinel-5p/TROPOMI validation campaign was held in the Netherlands based at the Cabauw Experimental Site for Atmospheric Research during September/October 2019. The 2019 TROpomi vaLIdation eXperiment (TROLIX’19) consisted of active and passive remote sensing platforms in conjunction with several balloon-borne, airborne and surface chemical measurements.

The goal of this geophysical validation campaign was to make intensive observations for thevalidation of TROPOMI L2 main data products (such as NO2, O3, HCHO, aerosol layer height, clouds and UVAI) under realistic, non-idealized conditions with varying cloud cover and a wide range of atmospheric conditions.

Since TROPOMI is a hyperspectral imager with a very high spatial resolution of 3.5 km x 7 km, understanding local effects such as inhomogeneous sources of pollution, sub-pixel clouds and variations in ground albedo is important to interpret TROPOMI results. Therefore, the campaign includes sub-pixel resolution local networks of sensors, involving Pandora and MAX-DOAS instruments, around Cabauw (51.97°N, 4.93°E) and within the city of Rotterdam (51.92°N, 4.48°E). Cabauw is considered rural while Rotterdam is densely populated and industrialized. CESAR (Cabauw Experimental Site for Atmospheric Research), using its comprehensive in-situ and remote sensing observation program in and around the 213 m meteorological tower (see Section 3), was the main site of the campaign with focus on vertical profiling using lidar instruments for aerosols, clouds, water vapor, tropospheric and stratospheric ozone, as well as balloon-borne sensors for NO2. The ozonesonde profiles were measured at KNMI in De Bilt which is approximately 23 km from the CESAR site.
|atLocation=Cabauw
|hasGeographicCoordinates=51.970271 N, 4.926209 E
|startDate=2019-09-01
|endDate=2019-09-30
|contactPoint=Arnoud Apituley
|landingPage=https://ruisdael-observatory.nl/trolix19-campaign/
|hasParticipant=KNMI
}}

CINDI-3

2025-08-08T07:44:44Z

Marije Timmermans:

{{Campaign
|title=CINDI-3
|description=Third Cabauw Intercomparison of Nitrogen Dioxide measuring Instruments, which took place at the Cabauw Experimental Site for Atmospheric Research (CESAR) from 21 May until 24 June 2024. CESAR is one of the main facilities of the Dutch Ruisdael Observatory located midway in between the cities of Rotterdam and Utrecht, and managed by KNMI.

Over 100 researchers from 18 countries participated in CINDI-3, operating 32 UV-Vis DOAS instruments to compare and intercalibrate measurements of air pollutants and to support the validation of satellite measurements from space-borne instruments such as Sentinel-5p/TROPOMI. CINDI-3 is the third intercomparison campaign of this kind. The overall campaign planning and coordination was carried out by a steering committee, led by BIRA-IASB (Royal Belgian Institute for Space Aeronomy), coordinating the CINDI-3 intercomparison schedule and all additional activities such as the mobile and aircraft observations.

The main science objectives of CINDI-3 are the following:
- To assess the consistency of slant column measurements of several key target species (NO2, ozone, O4 and HCHO) of relevance for the validation of S5P and the future ESA atmospheric
Sentinels, through coordinated operation of a large number of DOAS and MAXDOAS instruments from all over the world.
- To study the relationship between remote-sensing column- and profile-measurements of NO2, HCHO and ozone and reference in-situ concentration measurements of the same species.
- To investigate the horizontal representativeness of MAXDOAS measuring systems in view of their use for the validation of satellite tropospheric measurements featuring ground pixel areas in the range of 25-50 km2.

CINDI-3 was organized as part of the ACTRIS-CREGARS Topical Center for trace gas remote sensing, within the framework of the collaboration between ACTRIS and NDACC, and conducted with additional support from ESA, NASA and from the EU Horizon2020 ATMO-ACCESS project (https://www.atmo-access.eu/).
Additionally, the campaign was supported by KNMI.
|atLocation=Cabauw
|hasGeographicCoordinates=51.970271 N, 4.926209 E
|startDate=2024-05-21
|endDate=2024-06-25
|landingPage=https://ruisdael-observatory.nl/cindi-3-intercomparison-campaign/
|hasParticipant=ACTRIS, KNMI
|hasImage=cindi3.png
}}

CINDI-3

2025-08-08T07:44:16Z

Marije Timmermans:

{{Campaign
|title=CINDI-3
|description=Third Cabauw Intercomparison of
Nitrogen Dioxide measuring Instruments, which took place at the Cabauw Experimental Site for Atmospheric Research (CESAR) from 21 May until 24 June 2024. CESAR is one of the main facilities of the Dutch Ruisdael Observatory located midway in between the cities of Rotterdam and Utrecht, and managed by KNMI.

Over 100 researchers from 18 countries participated in CINDI-3, operating 32 UV-Vis DOAS instruments to compare and intercalibrate measurements of air pollutants and to support the validation of satellite measurements from space-borne instruments such as Sentinel-5p/TROPOMI. CINDI-3 is the third intercomparison campaign of this kind. The overall campaign planning and coordination was carried out by a steering committee, led by BIRA-IASB (Royal Belgian Institute for Space Aeronomy), coordinating the CINDI-3 intercomparison schedule and all additional activities such as the mobile and aircraft observations.

The main science objectives of CINDI-3 are the following:
- To assess the consistency of slant column measurements of several key target species (NO2, ozone, O4 and HCHO) of relevance for the validation of S5P and the future ESA atmospheric
Sentinels, through coordinated operation of a large number of DOAS and MAXDOAS instruments from all over the world.
- To study the relationship between remote-sensing column- and profile-measurements of NO2, HCHO and ozone and reference in-situ concentration measurements of the same species.
- To investigate the horizontal representativeness of MAXDOAS measuring systems in view of their use for the validation of satellite tropospheric measurements featuring ground pixel areas in the range of 25-50 km2.

CINDI-3 was organized as part of the ACTRIS-CREGARS Topical Center for trace gas remote sensing, within the framework of the collaboration between ACTRIS and NDACC, and conducted with additional support from ESA, NASA and from the EU Horizon2020 ATMO-ACCESS project (https://www.atmo-access.eu/).
Additionally, the campaign was supported by KNMI.
|atLocation=Cabauw
|hasGeographicCoordinates=51.970271 N, 4.926209 E
|startDate=2024-05-21
|endDate=2024-06-25
|landingPage=https://ruisdael-observatory.nl/cindi-3-intercomparison-campaign/
|hasParticipant=KNMI, ACTRIS
|hasImage=cindi3.png
}}

CINDI

2025-07-16T08:38:27Z

Marije Timmermans:

{{Campaign
|title=CINDI
|description=The CINDI campaign (Cabauw Intercomparison Campaign of Nitrogen Dioxide measuring Instruments) is a CEOS, GEOMON and NDACC initiative. The main objective of this campaign is to intercompare the NO2 measuring instruments that can be used for validation of tropospheric NO2 from satellites. Many different in-situ and remote sensing instruments participated.
|atLocation=Cabauw
|hasGeographicCoordinates=51.970271 N, 4.926209 E
|startDate=2009-06-01
|endDate=2009-07-31
|contactPoint=Arnoud Apituley
|landingPage=https://uv-vis.aeronomie.be/groundbased/campaigns/CINDIcamp.php
|hasParticipant=KNMI, RIVM, TNO
}}

CINDI

2025-07-16T08:37:58Z

Marije Timmermans: Created page with "{{Campaign |title=CINDI |description=The CINDI campaign (Cabauw Intercomparison Campaign of Nitrogen Dioxide measuring Instruments) is a CEOS, GEOMON and NDACC initiative. The main objective of this campaign is to intercompare the NO2 measuring instruments that can be used for validation of tropospheric NO2 from satellites. Many different in-situ and remote sensing instruments participated. |atLocation=Cabauw |hasGeographicCoordinates=51.970271 N, 4.926209 E |startDate=2..."

CINDY3

2025-07-16T08:29:05Z

Marije Timmermans: Marije Timmermans moved page CINDY3 to CINDI-3: Correct name of campaign

#REDIRECT [[CINDI-3]]

CINDI-3

2025-07-16T08:29:05Z

Marije Timmermans: Marije Timmermans moved page CINDY3 to CINDI-3: Correct name of campaign

{{Campaign
|title=CINDI-3
|description=intercomparison campaign CINDI-3
|atLocation=Cabauw
|hasGeographicCoordinates=51.970271 N, 4.926209 E
|startDate=2024-05-21
|endDate=2024-06-25
|landingPage=https://ruisdael-observatory.nl/cindi-3-intercomparison-campaign/
|hasParticipant=KNMI
|hasImage=cindi3.png
}}

CINDI-2

2025-07-09T12:39:21Z

Marije Timmermans: Created page with "{{Campaign |title=CINDI-2 |description=CINDI stands for Cabauw Intercomparison of Nitrogen Dioxide Measuring Instruments and was focussed on the comparison of a number of ground-based DOAS instruments (Differential Optical Absorption Spectroscopy) for measuring atmospheric Nitrogen Dioxide (NO2). |atLocation=Cabauw |hasGeographicCoordinates=51.970271 N, 4.926209 E |startDate=2016-08-25 |endDate=2016-10-07 |contactPoint=Arnoud Apituley |landingPage=https://ruisdael-observ..."

{{Campaign
|title=CINDI-2
|description=CINDI stands for Cabauw Intercomparison of Nitrogen Dioxide Measuring Instruments and was focussed on the comparison of a number of ground-based DOAS instruments (Differential Optical Absorption Spectroscopy) for measuring atmospheric Nitrogen Dioxide (NO2).
|atLocation=Cabauw
|hasGeographicCoordinates=51.970271 N, 4.926209 E
|startDate=2016-08-25
|endDate=2016-10-07
|contactPoint=Arnoud Apituley
|landingPage=https://ruisdael-observatory.nl/campaigns/cindi-2-campaign/
|hasParticipant=KNMI, TNO
}}

TROLIX-19

2025-07-09T11:45:43Z

Marije Timmermans: Created page with "{{Campaign |title=TROLIX-19 |description=The TROpomi vaLIdation eXperiment (TROLIX) consisted of active and passive remote sensing platforms in conjunction with several balloon-borne, airborne and surface chemical measurements. The goal of this geophysical validation campaign was to make intensive observations to establish the quality of TROPOMI L2 main data products (UVAI, Aerosol Layer Height, NO2, O3, HCHO, Clouds) under realistic non-idealized conditions with varying..."

{{Campaign
|title=TROLIX-19
|description=The TROpomi vaLIdation eXperiment (TROLIX) consisted of active and passive remote sensing platforms in conjunction with several balloon-borne, airborne and surface chemical measurements. The goal of this geophysical validation campaign was to make intensive observations to establish the quality of TROPOMI L2 main data products (UVAI, Aerosol Layer Height, NO2, O3, HCHO, Clouds) under realistic non-idealized conditions with varying cloud cover and a wide range of atmospheric conditions.
|atLocation=Cabauw
|hasGeographicCoordinates=51.970271 N, 4.926209 E
|startDate=2019-09-01
|endDate=2019-09-30
|contactPoint=Arnoud Apituley
|landingPage=https://ruisdael-observatory.nl/trolix19-campaign/
|hasParticipant=KNMI
}}

KNMI drop size distributions from 2D video disdrometer at Cabauw

2025-07-02T09:09:47Z

Marije Timmermans:

{{Dataset
|title=Precipitation - unvalidated dropsize distribution measured with 2D video disdrometer at 1 minute interval at Cabauw
|description=Unvalidated drop size distributions as measured by a 2D Video Distromenter at the remote sensing site at Cabauw, averaged over 1 minute periods, with diameter classes of 0.10 mm. Drops larger than 6.00 mm and drops with velocities that deviate more than +-40% of the theoretical fall velocities corresponding to the drop diameter are discarded. Data are available from 2008-07-01.
|type=Remote Sensing Observation
|format=netCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-2dvd-dsd-la1-t1-v1-0
|license=CC BY 4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|atLocation=Cabauw
|hasGeographicCoordinates=51.970 N, 4.926 E
|hasElevation=-0.7
|startDate=2008-07-01
|endDate=2010-06-30
}}

KNMI Clouds - UV-Lidar uncalibrated attenuated backscatter at 30 s interval at Cabauw

2025-07-02T09:07:00Z

Marije Timmermans:

{{Dataset
|title=KNMI Clouds - UV-Lidar uncalibrated attenuated backscatter at 30 s interval at Cabauw
|description=Uncalibrated attenuated backscatter at 30 seconds and 15 meters resolution.
|type=Remote Sensing Observation
|format=NetCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-uvlidar-backsct-la1-t30s-v1-0
|license=CC BY 4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|atLocation=Cabauw
|hasGeographicCoordinates=51.97 N, 4.93 E
|startDate=2007-07-05
|endDate=2019-01-30
}}

KNMI Clouds - cloudbase heights and backscatter profiles from CT75 ceilometer at 30 s interval at Cabauw

2025-07-02T09:06:28Z

Marije Timmermans:

{{Dataset
|title=KNMI Clouds - cloudbase heights and backscatter profiles from CT75 ceilometer at 30 s interval for Cabauw
|description=Dataset contains backscatter profiles and system status signals from CT75 ceilometer at 30 s time resolution. Operational retrieved cloud base heights (up to 3 levels) are included. Vertical resolution: backscatter 30 m, for cloud base 15 m.
|type=Remote Sensing Observation
|format=NetCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-ct75-backscatt-la1-t30s-v1-0
|license=CC BY 4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|atLocation=Cabauw
|hasGeographicCoordinates=51.97 N, 4.93 E
|startDate=2000-08-23
|endDate=2013-06-19
}}

KNMI Air quality – NO2 and O3 measured with Pandora in Cabauw-NL

2025-07-02T09:04:51Z

Marije Timmermans:

{{Dataset
|title=KNMI Air quality – NO2 and O3 measured with Pandora in Cabauw-NL
|description=Tropospheric and total columns of NO2 and total columns of O3, retrieved from Pandora measurements in Cabauw-NL. Temporal resolution is approximately 4/hour. The data can be found here: http://data.pandonia-global-network.org/Cabauw/Pandora118s1/L2/
|type=Remote Sensing Observation
|format=ASCII
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/maxdoas-cabauw-1
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.968 N, 4.927 E
|startDate=2016-08-18
|endDate=2030-01-01
}}

KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in De Bilt-NL

2025-07-02T09:04:40Z

Marije Timmermans:

{{Dataset
|title=KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in De Bilt-NL
|description=Tropospheric columns and profiles of NO2, HCHO and aerosol, retrieved from Multi-Axes DOAS measurements in De Bilt-NL. Temporal resolution is approximately 4/hour for no2 and aerosol, 1/hour for HCHO. The profiles have limited vertical resolution, with 2-4 degrees of freedom. The data can be found here: https://www-air.larc.nasa.gov/missions/ndacc/data.html?RapidDelivery=rd-list
|type=Remote Sensing Observation
|format=HDF4
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/MAXDOAS-de-bilt-1
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=52.101 N, 5.178 E
|startDate=2018-02-21
|endDate=2030-01-01
}}

KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in Cabauw-NL

2025-07-02T09:04:21Z

Marije Timmermans:

{{Dataset
|title=KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in Cabauw-NL
|description=Tropospheric columns and profiles of NO2, HCHO and aerosol, retrieved from Multi-Axes DOAS measurements in Cabauw-NL. Temporal resolution is approximately 4/hour for no2 and aerosol, 1/hour for HCHO. The profiles have limited vertical resolution, with 2-4 degrees of freedom. The data can be found here: https://www-air.larc.nasa.gov/missions/ndacc/data.html?RapidDelivery=rd-list
|type=Remote Sensing Observation
|format=HDF4
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/MAXDOAS-cabauw-1
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.968 N, 4.927 E
|startDate=2018-02-15
|endDate=2030-01-01
}}

Marije Timmermans

2025-06-19T09:37:53Z

Marije Timmermans:

{{Person
|name=Marije Timmermans
|mbox=opendata@knmi.nl
|affiliation=KNMI
|hasRole=data manager
}}
Marije is a member of the Ruisdael data catalog core development team since December 2024.

KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in Cabauw-NL

2025-02-14T13:49:07Z

Marije Timmermans:

{{Dataset
|title=KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in Cabauw-NL
|description=Tropospheric columns and profiles of NO2, HCHO and aerosol, retrieved from Multi-Axes DOAS measurements in Cabauw-NL. Temporal resolution is approximately 4/hour for no2 and aerosol, 1/hour for HCHO. The profiles have limited vertical resolution, with 2-4 degrees of freedom. The data can be found here: https://www-air.larc.nasa.gov/missions/ndacc/data.html?RapidDelivery=rd-list
|type=In-situ Observation
|format=HDF4
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/MAXDOAS-cabauw-1
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.968 N, 4.927 E
|startDate=2018-02-15
|endDate=2030-01-01
}}

KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in Cabauw-NL

2025-02-14T13:48:54Z

Marije Timmermans:

{{Dataset
|title=KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in Cabauw-NL
|description=Tropospheric columns and profiles of NO2, HCHO and aerosol, retrieved from Multi-Axes DOAS measurements in Cabauw-NL. Temporal resolution is approximately 4/hour for no2 and aerosol, 1/hour for HCHO. The profiles have limited vertical resolution, with 2-4 degrees of freedom. The data can be found here: https://www-air.larc.nasa.gov/missions/ndacc/data.html?RapidDelivery=rd-list
|type=
|format=HDF4
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/MAXDOAS-cabauw-1
|identifier=
|license=https://creativecommons.org/licenses/by-sa/4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.968 N, 4.927 E
|hasElevation=
|startDate=2018-02-15
|endDate=2030-01-01
}}

KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in Cabauw-NL

2025-02-14T13:48:38Z

Marije Timmermans: Created page with "{{Dataset |title=KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in Cabauw-NL |description=Tropospheric columns and profiles of NO2, HCHO and aerosol, retrieved from Multi-Axes DOAS measurements in Cabauw-NL. Temporal resolution is approximately 4/hour for no2 and aerosol, 1/hour for HCHO. The profiles have limited vertical resolution, with 2-4 degrees of freedom. The data can be found here: https://www-air.larc.nasa.gov/missions/ndacc/data.html?RapidDeliv..."

KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in De Bilt-NL

2025-02-14T13:46:41Z

Marije Timmermans:

{{Dataset
|title=KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in De Bilt-NL
|description=Tropospheric columns and profiles of NO2, HCHO and aerosol, retrieved from Multi-Axes DOAS measurements in De Bilt-NL. Temporal resolution is approximately 4/hour for no2 and aerosol, 1/hour for HCHO. The profiles have limited vertical resolution, with 2-4 degrees of freedom. The data can be found here: https://www-air.larc.nasa.gov/missions/ndacc/data.html?RapidDelivery=rd-list
|type=In-situ Observation
|format=HDF4
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/MAXDOAS-de-bilt-1
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=52.101 N, 5.178 E
|startDate=2018-02-21
|endDate=2030-01-01
}}

KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in De Bilt-NL

2025-02-14T13:46:28Z

Marije Timmermans:

{{Dataset
|title=KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in De Bilt-NL
|description=Tropospheric columns and profiles of NO2, HCHO and aerosol, retrieved from Multi-Axes DOAS measurements in De Bilt-NL. Temporal resolution is approximately 4/hour for no2 and aerosol, 1/hour for HCHO. The profiles have limited vertical resolution, with 2-4 degrees of freedom. The data can be found here: https://www-air.larc.nasa.gov/missions/ndacc/data.html?RapidDelivery=rd-list
|type=
|format=HDF4
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/MAXDOAS-de-bilt-1
|identifier=
|license=https://creativecommons.org/licenses/by-sa/4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=52.101 N, 5.178 E
|hasElevation=
|startDate=2018-02-21
|endDate=2030-01-01
}}

KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in De Bilt-NL

2025-02-14T13:46:07Z

Marije Timmermans: Created page with "{{Dataset |title=KNMI Air quality - NO2, HCHO and aerosol measured with MAXDOAS in De Bilt-NL |description=Tropospheric columns and profiles of NO2, HCHO and aerosol, retrieved from Multi-Axes DOAS measurements in De Bilt-NL. Temporal resolution is approximately 4/hour for no2 and aerosol, 1/hour for HCHO. The profiles have limited vertical resolution, with 2-4 degrees of freedom. The data can be found here: https://www-air.larc.nasa.gov/missions/ndacc/data.html?RapidDel..."

KNMI Air quality – NO2 and O3 measured with Pandora in Cabauw-NL

2025-02-14T13:37:59Z

Marije Timmermans:

{{Dataset
|title=KNMI Air quality – NO2 and O3 measured with Pandora in Cabauw-NL
|description=Tropospheric and total columns of NO2 and total columns of O3, retrieved from Pandora measurements in Cabauw-NL. Temporal resolution is approximately 4/hour. The data can be found here: http://data.pandonia-global-network.org/Cabauw/Pandora118s1/L2/
|type=In-situ Observation
|format=ASCII
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/maxdoas-cabauw-1
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.968 N, 4.927 E
|startDate=2016-08-18
|endDate=2030-01-01
}}

KNMI Air quality – NO2 and O3 measured with Pandora in Cabauw-NL

2025-02-14T13:32:42Z

Marije Timmermans:

{{Dataset
|title=KNMI Air quality – NO2 and O3 measured with Pandora in Cabauw-NL
|description=Tropospheric and total columns of NO2 and total columns of O3, retrieved from Pandora measurements in Cabauw-NL. Temporal resolution is approximately 4/hour. The data can be found here: http://data.pandonia-global-network.org/Cabauw/Pandora118s1/L2/
|type=
|format=ASCII
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/maxdoas-cabauw-1
|identifier=
|license=https://creativecommons.org/licenses/by-sa/4.0/
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.968 N, 4.927 E
|hasElevation=
|startDate=2016-08-18
|endDate=2030-01-01
}}

KNMI Air quality – NO2 and O3 measured with Pandora in Cabauw-NL

2025-02-14T13:31:04Z

Marije Timmermans: Created page with "{{Dataset |title=KNMI Air quality – NO2 and O3 measured with Pandora in Cabauw-NL |description=Tropospheric and total columns of NO2 and total columns of O3, retrieved from Pandora measurements in Cabauw-NL. Temporal resolution is approximately 4/hour. |type=In-situ Observation |landingPage=http://data.pandonia-global-network.org/Cabauw/Pandora118s1/L2/ |startDate=2016-08-18 |endDate=2030-01-01 }}"

KNMI Radiation - validated surface long and shortwave radiation, both in and outgoing at 10 minute interval at Cabauw

2025-01-03T14:39:35Z

Marije Timmermans:

{{Dataset
|title=KNMI Radiation - validated surface long and shortwave radiation, both in and outgoing at 10 minute interval at Cabauw
|description=Validated short wave and longwave in and outgoing radiation at the surface from Cabauw on a 10-minute basis. At 14-June-2022 surface radiation temperatures are added from 08-September-2011 onward. For more information about how to interpret the data, please read: https://cdn.knmi.nl/knmi/pdf/bibliotheek/knmipubTR/TR384.pdf. Please note: Due to dataset maintenance, data uploading has been halted temporarily since 01-06-2021 for an unspecified time.
|type=In-situ Observation
|format=NetCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-surface-radiation-lb1-t10-v1-0
|identifier=
|license=CC BY 4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.97 N, 4.926 E
|hasElevation=
|startDate=2000-05-01
|endDate=2030-01-01
}}

KNMI Radiation - validated and gapfilled surface long and shortwave radiation, both in and outgoing at 10 minute interval at Cabauw

2025-01-03T14:38:38Z

Marije Timmermans:

{{Dataset
|title=KNMI Radiation - validated and gapfilled surface long and shortwave radiation, both in and outgoing at 10 minute interval at Cabauw
|description=Validated and gapfilled short wave and longwave in and outgoing radiation at the surface from Cabauw on a 10-minute basis. For more information about how to interpret the data, please read: https://cdn.knmi.nl/knmi/pdf/bibliotheek/knmipubTR/TR384.pdf. Please note: Due to dataset maintenance, data uploading has been halted temporarily since 01-06-2021 for an unspecified time.
|type=In-situ Observation
|format=NetCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-surface-radiation-lc1-t10-v1-0
|identifier=
|license=CC BY 4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.97 N, 4.926 E
|hasElevation=
|startDate=2001-01-01
|endDate=2030-01-01
}}

KNMI Radiation - unvalidated surface long and shortwave radiation, both in and outgoing at 10 minute interval at Cabauw

2025-01-03T14:37:40Z

Marije Timmermans:

{{Dataset
|title=KNMI Radiation - unvalidated surface long and shortwave radiation, both in and outgoing at 10 minute interval at Cabauw
|description=Unvalidated short wave and longwave in and outgoing radiation at the surface from Cabauw on a 10-minute basis. The data is updated in realtime, so the file of the current day is updated every 10 minutes. For more information about how to interpret the data, please read: https://cdn.knmi.nl/knmi/pdf/bibliotheek/knmipubTR/TR384.pdf.
|type=
|format=NetCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-surface-radiation-la1-t10-v1-0
|identifier=
|license=CC BY 4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.97 N, 4.926 E
|hasElevation=
|startDate=2020-01-01
|endDate=2030-01-01
}}

KNMI Soil heat observations at Cabauw

2025-01-03T12:06:08Z

Marije Timmermans:

{{Dataset
|title=KNMI Soil heat - validated soil temperature and heat flux profiles at 10 minute interval at Cabauw
|description=Validated soil temperature profile and soil heat fluxes at Cabauw on a 10-minute basis. For more information about how to interpret the data, please read: https://cdn.knmi.nl/knmi/pdf/bibliotheek/knmipubTR/TR384.pdf.
Please note: Due to dataset maintenance, data uploading has been halted temporarily since 01-06-2021 for an unspecified time.
|type=In-situ Observation
|format=netCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-soil-heat-lb1-t10-v1-0
|contactPoint=Mariska Koning
|creator=Mariska Koning
|creator_organization=KNMI
|atLocation=Cabauw
|hasGeographicCoordinates=51.97 N, 4.926 E
|hasElevation=-0.7
|startDate=2001-08-01
|endDate=2030-01-01
}}

KNMI meteorological profiles in the Cabauw tower

2025-01-03T12:02:22Z

Marije Timmermans:

{{Dataset
|title=KNMI Meteo profiles - validated and gapfilled tower profiles of wind, dew point, temperature and visibility at 10 minute interval at Cabauw
|description=Validated and gapfilled meteorological profile observations of wind speed, wind direction, temperature, dew point and visibility from the 200 m Cabauw tower on a 10-minute basis. For more information about how to interpret the data, please read: https://cdn.knmi.nl/knmi/pdf/bibliotheek/knmipubTR/TR384.pdf. Please note: Due to dataset maintenance, data uploading has been halted temporarily since 01-06-2021 for an unspecified time.
|type=In-situ Observation
|format=netCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-tower-meteo-lc1-t10-v1-0
|contactPoint=Mariska Koning
|creator=Mariska Koning
|creator_organization=KNMI
|atLocation=Cabauw
|hasGeographicCoordinates=51.9703 N, 4.9262 E
|hasElevation=-0.7 m
|startDate=2001-01-01
|endDate=2030-01-01
}}

KNMI Radiation - validated and gapfilled surface long and shortwave radiation, both in and outgoing at 10 minute interval at Cabauw

2025-01-03T11:57:59Z

Marije Timmermans:

{{Dataset
|title=KNMI Radiation - validated and gapfilled surface long and shortwave radiation, both in and outgoing at 10 minute interval at Cabauw
|description=Validated and gapfilled short wave and longwave in and outgoing radiation at the surface from Cabauw at 10 minutes timebasis. For more information about how to interpret the data, please read: http://bibliotheek.knmi.nl/knmipubTR/TR384.pdf.
|type=In-situ Observation
|format=NetCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-surface-rad-lc1-t10-v1-0
|identifier=
|license=CC BY 4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.97 N, 4.926 E
|hasElevation=
|startDate=2000-05-01
|endDate=2030-01-01
}}

KNMI Surface fluxes - validated and gapfilled fluxes of heat, humidity, radiation, momentum and CO2 at 10 minute interval at Cabauw

2025-01-03T10:26:39Z

Marije Timmermans:

{{Dataset
|title=KNMI Surface fluxes - validated and gapfilled fluxes of heat, humidity, radiation, momentum and CO2 at 10 minute interval at Cabauw
|description=Validated and gapfilled surface fluxes of net radiation, momentum, sensible heat, latent heat, soil heat and carbon dioxide at Cabauw on a 10-minute basis. For more information about how to interpret the data, please read: https://cdn.knmi.nl/knmi/pdf/bibliotheek/knmipubTR/TR384.pdf. Please note: Due to dataset maintenance, data uploading has been halted temporarily since 01-06-2021 for an unspecified time.
|type=In-situ Observation
|format=NetCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-surface-flux-lc1-t10-v1-0
|identifier=
|license=CC BY 4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.97 N, 4.926 E
|hasElevation=
|startDate=2001-01-01
|endDate=2030-01-01
}}

KNMI Surface fluxes - unvalidated fluxes of heat, humidity, radiation, momentum and CO2 at 10 minute interval at Cabauw

2025-01-03T10:25:58Z

Marije Timmermans:

{{Dataset
|title=KNMI Surface fluxes - unvalidated fluxes of heat, humidity, radiation, momentum and CO2 at 10 minute interval at Cabauw
|description=Unvalidated surface fluxes of net radiation, momentum, sensible heat, latent heat, soil heat and carbon dioxide at Cabauw on a 10-minute basis. The data is updated in realtime, so the file of the current day is updated every 10 minutes. For more information about how to interpret the data, please read: https://cdn.knmi.nl/knmi/pdf/bibliotheek/knmipubTR/TR384.pdf.
|type=In-situ Observation
|format=NetCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-surface-flux-la1-t10-v1-0
|license=CC BY 4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.97 N, 4.926 E
|startDate=2020-01-01
|endDate=2030-01-01
}}

KNMI Soil water - validated soil moisture content profiles and water level at 10 minute interval at Cabauw

2025-01-03T10:25:36Z

Marije Timmermans:

{{Dataset
|title=KNMI Soil water - validated soil moisture content profiles and water level at 10 minute interval at Cabauw
|description=Validated soil moisture content profile and ground water levels at Cabauw on a 10-minute basis. For more information about how to interpret the data, please read: https://cdn.knmi.nl/knmi/pdf/bibliotheek/knmipubTR/TR384.pdf.

Please note: Due to dataset maintenance, data uploading has been halted temporarily since 01-06-2021 for an unspecified time.
|type=In-situ Observation
|format=NetCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-soil-water-lb1-t10-v1-1
|identifier=
|license=CC BY 4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.97 N, 4.926 E
|hasElevation=
|startDate=2000-10-01
|endDate=2030-01-01
}}

KNMI Soil water - validated soil moisture content profiles and water level at 10 minute interval at Cabauw

2025-01-03T10:25:22Z

Marije Timmermans:

KNMI Soil water - unvalidated soil moisture content profiles and water level at 10 minute interval at Cabauw

2025-01-03T10:24:59Z

Marije Timmermans:

{{Dataset
|title=KNMI Soil water - unvalidated soil moisture content profiles and water level at 10 minute interval at Cabauw
|description=Unvalidated soil moisture content profile and ground water levels at Cabauw on a 10-minute basis. The data is updated realtime, so the last file might not contain all data yet. For more information about how to interpret the data, please read: https://cdn.knmi.nl/knmi/pdf/bibliotheek/knmipubTR/TR384.pdf.

Please note: Due to dataset maintenance, data uploading has been halted temporarily since 01-10-2021 for an unspecified time.
|type=In-situ Observation
|format=NetCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-soil-water-la1-t10-v1-0
|identifier=
|license=CC BY 4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.97 N, 4.926 E
|hasElevation=
|startDate=2021-01-01
|endDate=20230-01-01
}}

KNMI Soil heat - unvalidated soil temperature and heat flux profiles at 10 minute interval at Cabauw

2025-01-03T10:24:06Z

Marije Timmermans:

{{Dataset
|title=KNMI Soil heat - unvalidated soil temperature and heat flux profiles at 10 minute interval at Cabauw
|description=Unvalidated soil temperature profile and soil heat fluxes at Cabauw on a 10-minute basis. The data is updated realtime, so the last file might not contain all data yet. For more information about how to interpret the data, please read: https://cdn.knmi.nl/knmi/pdf/bibliotheek/knmipubTR/TR384.pdf.
Please note: Due to dataset maintenance, data uploading has been halted temporarily since 01-10-2021 for an unspecified time.
|type=In-situ Observation
|format=NetCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-soil-heat-la1-t10-v1-0
|identifier=
|license=CC BY 4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.97 N, 4.926 E
|hasElevation=
|startDate=2020-01-01
|endDate=2030-01-01
}}

KNMI Radiation - BSRN irradiance data at 1 minute interval at Cabauw

2025-01-03T10:23:43Z

Marije Timmermans:

{{Dataset
|title=KNMI Radiation - BSRN irradiance data at 1 minute interval at Cabauw
|description=Dataset contains direct, diffuse, global and downward longwave irradiances at 60 seconds time resolution. Dataset also contains air temperature, relative humidity and air pressure at instrument height. Quantities are identical to the ones found in the Baseline Surface Radiation Network (BSRN) central archive (www.pangaea.de/PHP/BSRN_Status.php). For release guidelines see: www.bsrn.awi.de/en/data/ conditions_of_data_release/details/ .
|type=In-situ Observation
|format=NetCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-bsrn-irraddown-la1-t1-v1-0
|identifier=
|license=CC BY 4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.97 N, 4.926 E
|hasElevation=
|startDate=2005-02-01
|endDate=2019-07-01
}}

KNMI Meteo surface - validated observations of common atmospheric variables at 10 minute interval at Cabauw

2025-01-03T10:23:18Z

Marije Timmermans:

{{Dataset
|title=KNMI Meteo surface - validated observations of common atmospheric variables at 10 minute interval at Cabauw
|description=Validated meteorological surface observations of precipitation, visibility, radiation, air pressure, wind speed, wind direction, temperature and dew point at Cabauw on a 10-minute basis. Visibility and precipitation type available from January 2008. For more information about how to interpret the data, please read: https://cdn.knmi.nl/knmi/pdf/bibliotheek/knmipubTR/TR384.pdf. Please note: Due to dataset maintenance, data uploading has been halted temporarily since 01-06-2021 for an unspecified time.
|type=In-situ Observation
|format=NetCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-surface-meteo-lb1-t10-v1-0
|identifier=
|license=CC BY 4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.97 N, 4.926 E
|hasElevation=
|startDate=2000-05-01
|endDate=2030-01-01
}}

KNMI Meteo surface - validated and gapfilled observations of common atmospheric variables at 10 minute interval at Cabauw

2025-01-03T10:22:33Z

Marije Timmermans:

{{Dataset
|title=KNMI Meteo surface - validated and gapfilled observations of common atmospheric variables at 10 minute interval at Cabauw
|description=Validated and gapfilled meteorological surface observations of precipitation, visibility, radiation, air pressure, wind speed, wind direction, temperature and dew point at Cabauw on a 10-minute basis. Visibility and precipitation type available from January 2008. For more information about how to interpret the data, please read: https://cdn.knmi.nl/knmi/pdf/bibliotheek/knmipubTR/TR384.pdf. Please note: Due to dataset maintenance, data uploading has been halted temporarily since 01-06-2021 for an unspecified time.
|type=In-situ Observation
|format=NetCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-surface-meteo-lc1-t10-v1-0
|identifier=
|license=CC BY 4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.97 N, 4.926 E
|hasElevation=
|startDate=2001-01-01
|endDate=2030-01-01
}}

KNMI Meteo surface - unvalidated observations of common atmospheric variables at 10 minute interval at Cabauw

2025-01-03T10:21:58Z

Marije Timmermans:

{{Dataset
|title=KNMI Meteo surface - unvalidated observations of common atmospheric variables at 10 minute interval at Cabauw
|description=Unvalidated meteorological surface observations of precipitation, visibility, radiation, air pressure, wind speed, wind direction, temperature and dew point at Cabauw on a 10-minute basis. Visibility and precipitation type available from January 2008. The data is updated in realtime, so the file of the current day is updated every 10 minutes. For more information about how to interpret the data, please read: https://cdn.knmi.nl/knmi/pdf/bibliotheek/knmipubTR/TR384.pdf.
|type=In-situ Observation
|format=NetCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-surface-meteo-la1-t10-v1-0
|identifier=
|license=CC BY 4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.97 N, 4.926 E
|hasElevation=
|startDate=2020-01-01
|endDate=2030-01-01
}}

KNMI Clouds - cloudbase heights and backscatter profiles from CT75 ceilometer at 30 s interval at Cabauw

2025-01-03T10:21:33Z

Marije Timmermans:

{{Dataset
|title=KNMI Clouds - cloudbase heights and backscatter profiles from CT75 ceilometer at 30 s interval for Cabauw
|description=Dataset contains backscatter profiles and system status signals from CT75 ceilometer at 30 s time resolution. Operational retrieved cloud base heights (up to 3 levels) are included. Vertical resolution: backscatter 30 m, for cloud base 15 m.
|type=In-situ Observation
|format=NetCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-ct75-backscatt-la1-t30s-v1-0
|license=CC BY 4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.97 N, 4.93 E
|startDate=2000-08-23
|endDate=2013-06-19
}}

KNMI Clouds - cloud cover retrieved from infrared measurements at 10 minute intervals at Cabauw

2025-01-03T10:21:06Z

Marije Timmermans:

{{Dataset
|title=KNMI Clouds - cloud cover retrieved from infrared measurements at 10 minute intervals at CESAR observatory
|description=Four cloud cover parameters are retrieved continuously from sky temperature measurements by a scanning infrared radiometer (NubiScope). These parameters are resp. total, low -, middle - and high level cloud cover. Only measurements 20 degrees above horizon are used to create a hemispherical cloud mask. The temperature deviation of a sky pixel from an estimated background sky temperature determines whether a pixel is considered to be cloudy or clear sky. For more information about CESAR: https://ruisdael-observatory.nl/cesar/
|type=Remote Sensing Observation
|format=NetCDF
|servedBy=KNMI Data Platform
|landingPage=https://dataplatform.knmi.nl/dataset/cesar-nubiscope-cldcov-la1-t10-v1-0
|license=CC BY 4.0
|contactPoint=Marije Timmermans
|creator_organization=KNMI
|hasGeographicCoordinates=51.97 N, 4.93 E
|startDate=2008-05-01
|endDate=2017-04-30
}}