TU Delft optical disdrometer Parsivel² PAR006 at Slufter: Difference between revisions

Revision as of 08:17, 18 November 2024

Dataset: TU Delft optical disdrometer Parsivel² PAR006 at Slufter
title	TU Delft Parsivel² disdrometer at Slufter (PAR006)
description	In-situ measurements of raindrop size distributions, fall velocities, drop number concentrations and surface rain rates recorded by an OTT Parsivel2 disdrometer named "PAR006" in Slufter, The Netherlands. Located in the Maasvlakte Rotterdam, The Slufter is a large-scale storage site for contaminated sludge in the southwestern part of the Rotterdam Maasvlakte, approximately 31 km West of the city center of Rotterdam. Along the ring dike of the Slufter, several wind turbines belong to the Windpark Slufterdam are providing electricity for the region. The same site also features a micro-rain radar "MRR005_Slufter" (since March 2022). All sensors are placed on top of an air quality monitoring container belonging to TNO, at a height of approx. 4 meters. The rough climate conditions near the coast of the North Sea, with high winds, salt, and sand creates a very challenging environment for long-term weather observations. Consequently, data availability tends to be lower than at other sites, due to frequent maintenance and technical issues.
type See Dataset Types' descriptions in Dataset type taxon descriptions	In-situ Observation
format	netCDF
served by data service	4TU.ResearchData
landing page
PID	10.4121/4f06f599-5b16-42d1-b0d1-5fe976fc3f2c
license	CC BY 4.0
contact person	Marc Schleiss
creator	Marc Schleiss
organization	TU Delft

Geographic and Temporal Information
location	Slufter
geographic coordinates	51.933496 N, 3.999849 E
elevation (meters)	33 m <br />
start date	2022-03-16
end date	2030-01-01
	Loading map... {"format":"leaflet","minzoom":false,"maxzoom":false,"limit":50,"offset":0,"link":"all","sort":[""],"order":["asc"],"headers":"show","mainlabel":"","intro":"","outro":"","searchlabel":"... further results","default":"","import-annotation":false,"width":"600px","height":"200px","centre":false,"title":"","label":"","icon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"zoom":10,"defzoom":14,"layers":["OpenStreetMap"],"image layers":[],"overlays":[],"resizable":false,"fullscreen":false,"scrollwheelzoom":false,"cluster":true,"clustermaxzoom":20,"clusterzoomonclick":true,"clustermaxradius":80,"clusterspiderfy":true,"geojson":"","clicktarget":"","showtitle":true,"hidenamespace":true,"template":"","userparam":"","activeicon":"","pagelabel":false,"ajaxcoordproperty":"","ajaxquery":"","locations":[{"text":"\u003Cb\u003E\u003Ca href=\"https://ruisdael-catalog.citg.tudelft.nl/index.php?title=TU_Delft_optical_disdrometer_Parsivel%C2%B2_PAR006_at_Slufter\" title=\"TU Delft optical disdrometer Parsivel\u00b2 PAR006 at Slufter\"\u003ETU Delft optical disdrometer Parsivel\u00b2 PAR006 at Slufter\u003C/a\u003E\u003C/b\u003E","title":"TU Delft optical disdrometer Parsivel\u00b2 PAR006 at Slufter","link":"","lat":51.933496,"lon":3.999849,"icon":""}],"imageLayers":[]}

Campaigns that contribute to Dataset

Related Media to TU Delft optical disdrometer Parsivel² PAR006 at Slufter

Note: This sensor is part of the Rotterdam Atmospheric Measurement Network (RAMN). It is co-located with a micro rain radar (MRR005).

Warning: The integrated temperature sensor of PAR006 was defective between November 2022 and April 2023. During this period, unrealistic temperatures above 60 degrees were measured . Also, the temperature time series contain some large spikes, suggesting the existence of other (unknown) problems. The temperature sensor was replaced on April 3, 2023. However, some large temperature spikes persisted beyond that period until the whole circuit board failed in November 2023 due to corrosion. The sensor was then sent back to the manufacturer and repaired. Data collection resumed in August 2024.

@@ Line 1: / Line 1: @@
 {{Dataset
 |title=TU Delft Parsivel² disdrometer at Slufter (PAR006)
-|description=In-situ measurements of drop size distributions and rain rates at Slufter, with a temporal resolution of 1 minute.
+|description=In-situ measurements of raindrop size distributions, fall velocities, drop number concentrations and surface rain rates recorded by an OTT Parsivel2 disdrometer named "PAR006" in Slufter, The Netherlands. Located in the Maasvlakte Rotterdam, The Slufter is a large-scale storage site for contaminated sludge in the southwestern part of the Rotterdam Maasvlakte, approximately 31 km West of the city center of Rotterdam. Along the ring dike of the Slufter, several wind turbines belong to the Windpark Slufterdam are providing electricity for the region. The same site also features a micro-rain radar "MRR005_Slufter" (since March 2022). All sensors are placed on top of an air quality monitoring container belonging to TNO, at a height of approx. 4 meters. The rough climate conditions near the coast of the North Sea, with high winds, salt, and sand creates a very challenging environment for long-term weather observations. Consequently, data availability tends to be lower than at other sites, due to frequent maintenance and technical issues.
 |type=In-situ Observation
 |format=netCDF
@@ Line 17: / Line 17: @@
 }}
 '''Note:''' This sensor is part of the Rotterdam Atmospheric Measurement Network (RAMN). It is co-located with a micro rain radar (MRR005).
+'''Warning:''' The integrated temperature sensor of PAR006 was defective between November 2022 and April 2023. During this period, unrealistic temperatures above 60 degrees were measured . Also, the temperature time series contain some large spikes, suggesting the existence of other (unknown) problems. The temperature sensor was replaced on April 3, 2023. However, some large temperature spikes persisted beyond that period until the whole circuit board failed in November 2023 due to corrosion. The sensor was then sent back to the manufacturer and repaired. Data collection resumed in August 2024.